AMT Datasouth Fastmark PT-1 - Manual (Page 19)

19
Fastmark PT1 User ’s Guide
Controls & Connections
Self-Test before Connecting
After the Battery is charged and media is loaded, before connecting the printer to a computer or a
portable data terminal, perform a printer self-test label to verify that the printer works properly:
Printing a Self-Test Label
 Verify the printer Power is turned off.
 Make sure the Battery is installed, and media is loaded.
 Press and hold the FEED button, and then press the POWER button to turn on the printer.
 After the printer starts to print, release the FEED button.
 Wait until the printer finishes printing, press the POWER button or FEED button to resume
normal printing mode.
Note: For more information on self-test printouts, see
Page 26. Troubleshooting – Printing a Configuration Report