Alwarerc Streak 800 Hexacopter Combo - Manual (Page 23)

Step 5.
Correct two Bipod Landing Gear Assemblies. Step 6.
Loosen the screws of the Body Landing Gear
Mount.
Step 7.
Insert the Carbon Boom of Bipod Landing Gear
Assembly into the metal mount of Body Landing
Gear Mount. Step 8.
Insert the Carbon Boom into the Metal Mount with
the depth of approximately 5mm.
Step 8.
Adjust the Bipod Landing Gear Assembly to make
the Landing Gear Skid be parallel to the Fixed
Arm. Step 9.
Repeat Step 6 to 8 to install the oppose side of
Bipod Landing Gear Assembly to the Streak 800
body.
23