Alwarerc Streak 800 Hexacopter Combo - Manual (Page 19)

Step 5.
Insert the ESC into the Motor Mount
completely. Repeat above steps to install
the other five ESCs.
Step 6.
Install ESC Board onto the Nylon Rods on
the Streak 800 body with 4pcs M3x6mm
Round Cap Screws.
Step 7.
Solder Battery Power Wire of ESC to the ESC
Board. (Red wire = +ve , Black wire = -ve)
Step 8.
Repeat Step 7 for other five ESCs.
Step 9.
Install the System Platform Frame back to
the Streak 800 body.
Step 10.
Stick 4pcs Battery Support Dampers onto
the upper Main Frame of Streak 800 to
support battery. Same for oppose site .
19