Alwarerc Streak 800 Hexacopter Combo - Manual (Page 15)

6.3 Assembly Steps – Motor Mount
Step 1.
Loosen the screws before insert the motor
mount to the Carbon Arm Boom.
Step 2.
Insert the Motor Mount to the boom and
stop until the boom edge is touching the
Inner Motor Metal Mount surface.
Step 3.
Adjust the Motor Mount to parallel to the
Streak 800 body before tighten the screws.
Step 4.
Secure the Motor Mount by tighten the
screws on the Metal Mount.
Repeat Step 1 to 4 to install other Motor Mounts to the Carbon Boom Arms.
15