Alwarerc Swing 2-Axis Camera Mount Combo User Manual
Page 5
Important Notice for assembly:
When installing metal to metal parts, little amount of Thread Lock must be applied for safety reason.
Assembly Step :
S1
S2
Prepare the Fiber Parts as shown above.
For this camera stand , you can use small of
big servo for the Tilt Axis, you may choose
the correct Tilt Servo Mount Frame for you
own servo. (Left one is for Standard Servo,
Right one is for Mini Servo)
S3
S4
Install the parts like the picture, use the
smallest Fiber Frame to lock the bearing and
secure by M2x6mm screws and M2 nuts.
Use M2x6mm screw and M2 nuts to install the
Tilt Servo Mount Frame.
S5
S6
Insert the bearings into the parts shown
above.
Fix the 8pcs 25mm rod to the U-board with
M2x6mm screws.