beautypg.com

3 installation, Jumper settings – ADLINK Starter Kit - nanoX User Manual

Page 39

background image

3.3 Installation

Jumper Settings

Make sure the

Backlight Voltage jumper (JP1) and Panel Voltage jumper (JP2) are

correct for the display panel you are using.

Set the

LVDS/TTL Mode jumper (JP4) to TTL Output Active (short pins 1-2).Set the

Backlight Control Mode jumper (JP5) to PWM or Voltage Level as appropriate for your

display.

NanoX Starter Kit – Quick Start Guide

Page 39

See also other documents in the category ADLINK Hardware: