beautypg.com

5 lvds output using hannstar flat panel display – ADLINK Starter Kit - nanoX User Manual

Page 27

background image

2.5 LVDS Output using HannStar Flat Panel Display

To use the HannStar 10.1” LVDS flat panel display included with the nanoX-BASE Starter Kit,

follow the instructions below.

Install Flat Panel Display

Required items

Step 1

Set the nanoX-BASE

Panel Power Jumper (JP3) is set

to +3.3V (short 1-2) and the

Backlight Power Jumper

(JP4) is set to +5V (short 2-3) as shown below

Step 2

Connect the JAE FI-Series end of the LVDS panel cable
(P/N: 30-20243-2000) to the LVDS flat panel display as
shown

NanoX Starter Kit – Quick Start Guide

Page 27

See also other documents in the category ADLINK Hardware: