ADLINK Starter Kit - nanoX - Manual (Page 33)

3 Using a TTL Flat Panel Display
Included with the nanoX Starter Kit is the Flat Panel Transfer Board (FPTB) which is intended
for prototyping and verification of LVDS and TTL flat panel displays with COM Express
systems. The FPTB is equipped with an LVDS-to-TTL converter to allow users to implement
TTL displays with COM Express systems that support LVDS only. Onboard PWM circuitry
supports backlight control for LVDS and TTL displays. For a complete description of the
FPTB and its applications, refer to the Flat Panel Transfer Board User's Manual.
Instructions on how to connect a TTL flat panel display to the nanoX-BASE using the FPTB
are provided below.
3.1 Overview
The FPTB provides LVDS-to-TTL conversion and backlight control for use with an ADLINK
reference carrier board and TTL display. The user must provide the cable connection from
the FPTB's TTL output and backlight control connectors to the TTL panel inputs.
TTL Display
FPTB
TTL
Signal
5V and
12V Input
Backlight
control
nanoX/Express-BASE
Carrier Board
LVDS output
LVDS-to-LVDS cable
ADLINK P/N: 30-20449-0000
nanoX/Express-BASE → FPTB → TTL Display:
NanoX Starter Kit – Quick Start Guide Page 33