ADLINK cExpress-BL - Manual (Page 8)

Page 8 cExpress-BL
2.4 Audio
¾ Integrated: Intel® HD Audio integrated on SoC
¾ Codec: Realtek ALC886 on Express-BASE6 Reference Carrier Board
2.5 LAN
¾ Integrated: MAC integrated on SoC
¾ Intel PHY: Intel® Ethernet Controller i218LM
¾ Interface: 10/100/1000 GbE connection
2.6 Multi I/O and Storage
¾ I/O Hub: Integrated on SOC
¾ USB: 2x USB 3.0 ports (USB0,1) and 6x USB 2.0 ports (USB2,3,4,5,6,7)
¾ SATA: 4x SATA 6Gb/s ports
¾ GPIO: 4 GPO and 4 GPI
2.7 Serial I/O on Module
¾ Chipset: Nuvoton NCT5104D
¾ Ports: 2x UARTs Rx/Tx only
¾ Console Redirection: UART0 or UART1 selectable in BIOS
2.8 Trusted Platform Module (TPM)
¾ Chipset: Atmel AT97SC3204
¾ Type: TPM 1.2
2.9 SEMA Board Controller
¾ Type: ADLINK Smart Embedded Management Agent (SEMA)
¾ Functions:
• Voltage/Current monitoring
• Power sequence debug support
• AT/ATX mode control
• Logistics and forensic information
• Flat panel control
• General purpose I2C
• Failsafe BIOS (dual BIOS )
• Watchdog timer and fan control
2.10 Debug
¾ 40-pin flat cable connector to be used with DB-40 debug module
Supports: BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
¾ 60-pin XDP header for ICE debug of CPU/chipset