ADLINK cExpress-BL - Manual (Page 54)

Page 54 cExpress-BL
Feature Options Description
IGfx Frequency Info only Display IGfx Frequency.
Graphics Turbo IMON Current Number entry field Graphics turbo IMON current values supported (14-31).
Primary Display Auto
IGFX
PEG
PCIE Select which of IGFX/PEG/PCI Graphics device should be Primary Display
Or select SG for Switchable Gfx.
Primary PCIE Auto
PCIE1
PCIE2
PCIE3
PCIE4
PCIE5
PCIE6
PCIE7 Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6/PCIE7 Graphics
device should be Primary PCIE.
Internal Graphics Auto
Disable
Enable Keep IGD enabled based on the setup options.
Aperture Size 128MB
256MB
512MB Select the Aperture Size.
DVMT Pre-Allocated XXM Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the
Internal Graphics Device.
DVMT Total Gfx Mem XXXM Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device.
Gfx Low Power Mode Enabled
Disabled This option is applicable for SFF only.
LVDS Backlight Mode BMC Mode
GTT Mode Select LVDS Backlight control function.
GTT LVDS Backlight Control 0%
20%
40%
60%
80%
100% Actual backlight value in percent of the maximum setting.
DDI function choose Display Port
HDMI Select DDI function choose to display port or HDMI.
Primary IGFX Boot Display VBIOS Default
EFP
LFP
EFP2 Select the Video Device which will be activated during POS.
LCD Panel Type VBIOS Default
640X480
800X600
1024X768
1280X1024
1400X1050
1600X1200
1366X768
1680X1050 Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item.