ADLINK cExpress-BL - Manual (Page 58)

Page 58 cExpress-BL
7.3.9 Advanced > Network Submenu
Feature Options Description
Network Stack Info only
Network Stack Enabled
Disabled Enable/Disable UEFI network stack.
PCH LAN Controller Enabled
Disabled Enable / Disable onboard NIC.
Wake on LAN Enabled
Disabled Enable / Disable integrated LAN to wake the system. (The Wake On LAN
cannot be disabled if ME is on at Sx state.
AMT Configuration Info only
Intel AMT Enabled
Disabled Enable/Disable Intel (R) Active Management Technology BIOS Extension.
BIOS Hotkey Pressed Enabled
Disabled Enable/Disable BIOS hotkey press.
MEBx Selection Screen Enabled
Disabled Enable/Disable MEBx selection screen.
Hide Un-Configure ME Confirmation Enabled
Disabled Hide Un-Configure ME without password Confirmation Prompt.
MEBx Debug Message Output Enabled
Disabled Enable MEBx debug message output.
Un-Configure ME Enabled
Disabled Un-Configure ME without password.
Amt Wait Timer 0 Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Disable ME Enabled
Disabled Set ME to Soft Temporary Disabled.
ASF Enabled
Disabled Enable/Disable Alert Specification Format.
Activate Remote Assistance Process Enabled
Disabled Trigger CIRA boot.
USB Configure Enabled
Disabled Enable/Disable USB Configure function.
PET Progress Enabled
Disabled User can Enable/Disable PET Events progress to recieve PET events or
not.
AMT CIRA Timeout 0 OEM defined timeout for MPS connection to be established. 0 - use the
default timeout value of 60 seconds. 255 - MEBX waits until the connection
succeeds.
Watchdog Enabled
Disabled
Enable/Disable WatchDog Timer.
OS Timer Set OS watchdog timer.
BIOS Timer Set BIOS watchdog timer.
7.3.10 Advanced > PCI and PCIe Submenu
Feature Options Description
PCI Common Settings Info only
PCI Latency Timer 32 PCI Bus Clocks Select the PCI latency defined in PCI Bus clock cycles