ADLINK CT-61 - Manual (Page 51)

Utilities 41
CT-61
7.4 Programming NT Mode EEPROM Map
The CT-61 supports operation in peripheral slot as PCI device with
PCI bus communication with the system board (Universal Mode).
To operate in a peripheral slot in Non-Transparent mode, the
PCIe-to-PCI bridge on the CT-61 should be set to Non-Transparent
mode by programming the NT mode EEPROM map. The EEPROM
map can be downloaded from the CT-61 product page on the
ADLINK website:
http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1017
To set the PCIe-to-PCI bridge on the CT-61 to NT mode, perform
the following steps:
1. Download the EERPOM map cPCI-6510_NT.rar from
the CT-61 product website under Utilities.
2. Prepare a bootable USB flash drive and extract the con-
tents of the folder cPCI-6510_NT into the root directory.
3. Insert the USB flash drive into the CT-61 in system slot
and power up the system.
4. Execute the file NT.bat to program the bridge to
Non-Transparent mode. The board will then operate in a
peripheral slot as a PCI device.
5. To return the CT-61 to Transparent mode, execute the
file TR.bat.