ADLINK CT-61 - Manual (Page 11)

Overview 1
CT-61
1 Overview
1.1 Introduction
The CT-61 is a conduction cooled 6U CompactPCI single board
computer in single slot width (4HP) form factor supporting 32nm
Intel® Core™ i7 SV, LV, ULV processors with integrated graphics
and ECC memory controller onboard. The CT-61 provides up to
8GB of dual channel DDR3-800/1066 ECC memory soldered
onboard and implements the Mobile Intel® QM57 Express Chipset
to provide a full feature set and optimal performance per watt.
The CT-61 provides a 64bit/66MHz CompactPCI bus, up to two
PMC sites with 64-bit/133MHz PCI-X bus supporting rear I/O
(PIM), and one PCI Express x8 XMC site (shared with inner PMC
site). Rear I/O provides versatile additional I/O including two
PICMG 2.16 GbE, USB, COM, High Definition Audio, and SATA
interfaces.
For flexibility of use, the CT-61 can be installed in a standard Com-
pactPCI system slot as system master, or peripheral slot as a PCI
device. Through hardware switch setting, the CT-61 optionally
supports operation in system or peripheral slots as a standalone
blade. The CT-61 is ideally suited for military, aviation, communi-
cation and other industrial applications.