beautypg.com

Stove and burner system assembly, Continued – Desa CSDPBN User Manual

Page 6

background image

111739-01A

For more information, visit www.desatech.com

For more information, visit www.desatech.com

6

STOVE AND BURNER
SYSTEM ASSEMBLY

Continued

STOVE AND BURNER SYSTEM ASSEMBLY

Removing/Replacing Glass Door
Installing Optional Blower Accessory

REMOVING/REPLACING DOORS AND GLASS

You must remove doors and glass panel to install logs, lava rock, and
ember material. To remove glass panel, you must first remove the
door assembly on stove body.

CAUTION: Do not operate this burner system with

a broken glass panel or without the door assembly
securely in place. For replacement part information
see

Replacement Parts, page 33.

Figure 8 - Removing Glass Panel from Burner System

Figure 7 - Removing Door Assembly from Stove

1.

Lift middle grate and set aside (see Figure 7).

2.

Remove two bolts from bottom of stove using an adjustable
wrench or 10 mm socket and one bolt from the top of stove with
an M6 allen wrench to remove door assembly (see Figure 7).

3.

Remove the screws from the 2 tabs at the top of the glass panel
while holding door securely keeping it from falling forward.

4.

Grasp panel by both sides and ease it upward off of the lower
bracket (see Figure 8)

5.

To replace glass panel and door assembly, follow the above
instructions in reverse.

Bolt

Bolt

Door
Assembly

Middle
Grate

NOTICE: If installing blower in an existing stove
burner system with gas connections, shut off gas
supply and disconnect heater from gas supply. Con-
tact a qualified service person to do this.

1.

Using an adjustable wrench or 10 mm socket, remove 4 hex
screws securing rear cover to back of stove body (see Figure 9).

2.

Separate bottom cover from rear cover by loosening the 8
mounting screws (see Figure 9).

3.

Align the holes in the top mounting tabs of blower with the
holes in wall of rear cover. Using the 4 screws provided, mount
blower and tighten screws securely (see Figure 10, page 7).

Figure 9 - Removing Rear Cover and Bottom Cover from Stove
Body

Stove Body

Rear Cover

Bottom Cover

Hex
Screws

Mounting
Screws

Mounting
Screws

Hex Screws

Mounting
Screws

Screw

Glass
Panel

INSTALLING OPTIONAL BLOWER
ACCESSORY

This manual is related to the following products: