ADLINK ND-6021 - Manual (Page 35)

Command Set • 29
3.6 Reset Status
@Description
Read the reset status of module at specified address to check whether if it
has been reset since the last reset status command was issued to the
module.
@Syntax
$(Addr)5
$ Command leading code.
(Addr) Address ID.
5 Reset Status Command.
@Response
!(Addr)(Status)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(Status)
0 : It has not been reset since the last reset
status command was issued.
1 : It has been reset since the last reset
status command was issued.
@Example
User command: $185
Response: !180
Status is 0 means this digital I/O module has not been reset,
since the last reset status command was issued.