ADLINK ND-6013 - Manual (Page 82)

74 • Command Set
3.36 Set Low Alarm
@Description
Set low alarm limit value at specified analog input module.
@Syntax
@(Addr)LO(Data)
@ Command leading code
(Addr) Address ID
LO Set low alarm limit value.
(Data) Alarm low limit value.
Data format is engineering units. (an + or - sign with
five decimal digits and a decimal fixed point.
@Response
!(Addr)
! Command is valid.
(Addr) Address ID.
@Example
User command: @06LO+100.00
Response: !06
Set low alarm limit value to +100
°C to accept J-type thermocouple input
at address 06H.
(6011/D, 6012/D, 6014D)