ADLINK ND-6013 - Manual (Page 100)

92 • Data Format and Input Range
The following table shows the relation between the input range setting with the
data format and the resolution when using ND-6011/D or 6018 to measure
temperature by thermocouple.
Code
Input Range
Thermocouple
Data
Format
Maximum Minimum
Displayed
Resolution
0E J (0 °C to 760°C) Eng. Units +760.00 +000.00 0.01 °C
0F K (0 °C to 1000°C) Eng. Units +1000.0 +0000.0 0.1 °C
10 T (-100 °Cto400°C) Eng. Units +400.00 -100.00 0.01 °C
11 E (0 °C to 1000°C) Eng. Units +1000.0 +0000.0 0.1 °C
12 R (500 °C to 1750°C) Eng. Units +1750.0 +0500.0 0.1 °C
13 S (500 °C to 1750°C) Eng. Units +1750.0 +0500.0 0.1 °C
14 B (500 °C to 1800°C) Eng. Units +1800.0 +0500.0 0.1 °C
15 N (-270 °C to 1300°C) Eng. Units +1300.0 -0270.0 0.1 °C
16 C (0 °C to 2320°C) Eng. Units +2320.0 +0000.0 0.1 °C
Code
Input Range
Thermocouple
Data
Format
Maximum Minimum
Displayed
Resolution
0E J (0 °C to 760°C) % of FSR +100.00 +000.00 0.01%
0F K (0 °C to 1000°C) % of FSR +100.00 +000.00 0.01%
10 T (-100 °Cto400°C) % of FSR +100.00 -025.00 0.01%
11 E (0 °C to 1000°C) % of FSR +100.00 +000.00 0.01%
12 R (500 °C to 1750°C) % of FSR +100.00 +028.57 0.01%
13 S (500 °C to 1750°C) % of FSR +100.00 +028.57 0.01%
14 B (500 °C to 1800°C) % of FSR +100.00 +027.27 0.01%
15 N (-270 °C to 1300°C) % of FSR +100.00 -020.76 0.01%
16 C (0 °C to 2320°C) % of FSR +100.00 +000.00 0.01%
Code
Input Range
Thermocouple
Data
Format
Maximum Minimum
Displayed
Resolution
0E J (0 °C to 760°C) 2’s Comp. 7FFF 0000 1 LSB
0F K (0 °C to 1000°C) 2’s Comp. 7FFF 0000 1 LSB
10 T (-100 °Cto400°C) 2’s Comp. 7FFF E000 1 LSB
11 E (0 °C to 1000°C) 2’s Comp. 7FFF 0000 1 LSB
12 R (500 °C to 1750°C) 2’s Comp. 7FFF 2492 1 LSB
13 S (500 °C to 1750°C) 2’s Comp. 7FFF 2492 1 LSB
14 B (500 °C to 1800°C) 2’s Comp. 7FFF 238E 1 LSB
15 N (-270 °C to 1300°C) 2’s Comp. 7FFF E56B 1 LSB
16 C (0 °C to 2320°C) 2’s Comp. 7FFF 0000 1 LSB