beautypg.com

ADLINK PCI-8124-C User Manual

Page 63

background image

TriggerMaster Utility

53

FIFO_# Empty: Set the FIFO_# empty event to the inter-
rupt factor. This interrupt event occurs when the FIFO is
empty.

FIFO_# Full: Set the FIFO_# full event to the interrupt
factor. This interrupt event occurs when FIFO is full.

LTC_#: Set the LTC_# event to the interrupt factor. This
interrupt event occurs when specified latch contition
meet.

TTL_IN_#: Set the TTL_IN_# event to the interrupt fac-
tor. This interrupt event occurs when TTL_IN_# receives
a signal.

2. For all channel: Set the linear comparator event to the

interrupt factor. This interrupt event occurs when the
comparing in linear comparator is finished.

See also other documents in the category ADLINK Hardware: