ADLINK PCI-8124-C - Manual (Page 51)

TriggerMaster Utility 41
5 TriggerMaster Utility
After installing the hardware (Chapters 2 and 3), it is necessary to
correctly configure all cards and double check the system before
running. This chapter gives guidelines for establishing a con-
trol system and manually testing the cards to verify correct opera-
tion. The TriggerMaster software provides a simple yet powerful
means to setup, configure, test, and debug for trigger system, like
a line scan system that uses 8124-C cards.
Note that TriggerMaster is only available for Windows 2000/XP/
Vista with a screen resolution higher than 1024x768. It cannot be
executed under a DOS environment.
5.1 Running TriggerMaster
After installing the software drivers for the card in Windows 2000/
XP/Vista, the TriggerMaster program can be located at path>\PCI-8124-C\TriggerMaster_PCI-8124.exe. To execute the
program, double click on the executable file or use Start -> Pro-
gram Files -> ADLINK -> PCI-8124-C -> TriggerMaster.
5.2 About TriggerMaster
Before running TriggerMaster please note that TriggerMaster
is a program written in VB.Net 2003, and is available only for
Windows 2000/XP/Vista with a screen resolution higher than
1024x768. It cannot be run under DOS.