4 installing the module, Installing the module – ADLINK PCI-9527 User Manual

Page 29

Getting Started

ADLINK Technology Inc.

2.4

Installing the Module

To install the card:

1. Turn off the system/chassis and disconnect the power

plug from the power source.

2. Remove the system/chassis cover.

3. Select the PCI slot that you intend to use, then remove

the bracket opposite the slot, if any.

4. Align the card connectors (golden fingers) with the slot,

then press the card firmly until the card is completely
seated on the slot.

5. Secure the card to the chassis with a screw.

6. Replace the system/chassis cover.

7. Connect the power plug to a power source, then turn on

the system/chassis.