ADLINK PXIe-3985 - Manual (Page 32)

20 Getting Started
2.2.2 Installing the PXIe-3985
1. Locate the system controller slot (Slot 1)
2. Depress the red locking lever and release the latch
3. Align the controller’s top and bottom edges with the card
guides, and carefully slide the PXIe-3985 into the chas-
sis, as shown
4. Elevate the latch until the PXIe-3985 is fully seated in the
chassis backplane. The alignment pin on the rear of the
latch can be threaded into the best fit alignment port in
the chassis rail.
5. Fasten the four mounting screws on the faceplate of
PXIe-3985, and connect all peripheral devices.