ADLINK PXIe-3985 - Manual (Page 31)

Getting Started 19
PXIe-3985
2.2.1 Installation Environment
When preparing to install any equipment described in this man-
ual, please refer to Chapter C: Important Safety Instructions.
Only install equipment in well lit areas on flat, sturdy surfaces
with access to basic tools such as flat- and cross-head screw-
drivers, preferably with magnetic heads as screws and stand-
offs are small and easily misplaced.
Recommended Installation Tools
Phillips (cross-head) screwdriver
Flat-head screwdriver
Anti-static wrist strap
Anti-static mat
ADLINK PXIe-3985 system controllers are electrostatically
sensitive and can be easily damaged by static electricity. The
equipment must be handled on a grounded anti-static mat, and
operators must wear an anti-static wristband, grounded at the
same point as the anti-static mat.
Inspect the carton and packaging for damage. Shipping and
handling may cause damage to the contents. Ensure that all
contents are undamaged before installing.
CAUTION:
All equipment must be protected from static discharge
and physical shock. Never remove any of the socketed
parts except at a static-free workstation. Use the
anti-static bag shipped with the product to handle the
equipment and wear a grounded wrist strap when servic-
ing or installing.