ADLINK PCI-7200 - Manual (Page 21)

Installation 9
2 Installation
This chapter describes how to install the PCI-7200. Package con-
tents and unpacking information are described. Because the PCI-
7200 is a Plug and Play device, there are no jumper or DIP switch
settings for configuration. The interrupt number and I/O port
address are assigned by the system BIOS during system boot up.
2.1 Contents
In addition to this User's Manual, the package includes the follow-
ing items:
X
PCI-7200 Digital I/O & Counter Card
X
ACL-10437: 40-pin to 37-pin D-Sub cable
or
X
cPCI-7200 Digital I/O & Counter Module for 3U
X
100-pin SCSI connector assembly
or
X
LPCI-7200S Low profile Digital I/O & Cunter Card
X ADLINK CD
X Software Installation Guide
If any of these items is missing or damaged, contact the ADLINK
dealer. Save the shipping materials and carton to ship or store the
product in the future.