3 digital output (do), Digital output (do) – ADLINK USB-7250 User Manual
Page 13
Introduction
3
USB-7230/7250
1.4.3
Digital Output (DO)
USB-7230
USB-7250
Min. pulse width for change
of state (COS) detection
20.83 ns (software programmable)
Data transfer
Programmed I/O
Optical Isolated Frequency/Event Counter
Number of channels
2
Logic level
VIH=5~12V, VIL=0~1.5V
Event counter width
32-bit
Max. input frequency
(DC coupled)
1 MHz
Min. input frequency
(DC coupled)
0.1 Hz
Max. frequency error
0.5% (f≤50kHz)
1% (50kHz 2% (500kHz Data transfer Programmed I/O Channels 16 (optical isolation) Output type Open drain MOSFET Supply voltage 5-35VDC Max. sink current 250 mA @ 100% duty (/channel) Data transfer Programmed I/O Channels 8 (solid state relay, non-latching) Contact rating Max. switching power 60 W, 125 VA Max. switching voltage 220 VDC, 250VAC Max. switching current 2 A Relay ON/OFF time Operate time 2 ms Release time 1 ms Contact resistance 75mΩ (max.) Expected lifetime 50 VDC 0.1A (resistive), 1x10 6 operations USB-7230 USB-7250
(/channel)