Acrosser AIV-HM76V1FL User Manual
Page 65
AIV-HM76V1FL Series User Manual
65
• If the system could power on well with the above configuration, please plug back
the other components one by one to find out which one may cause this problem.
• If the system still could not power on, please listen if there is any warning beeps.
• Memory issue:
• Clean the Golden Finger of memory.
• Clean the memory slots.
• Leave only one memory stick to test.
• If convenient, please change different memory modules to test again.
• CPU issue:
• Check whether the CPU is in our supported CPU.
• Check whether there are any damagers of your CPU or CPU socket.
• Check whether the CPU fan is correctly connected.
• If the problem still exist, please contact Acrosser FAE or authorized sales
channels.
Q 7. Where is the serial number located on my system?
• The serial number (S/N) is an alpha-numeric character located on the bottom or
side chassis.
(for reference only)
Q 8. How do I connect the second monitors to my system?
• Basically, there are “duplicate” and “extend” mode for the second monitor.
• “duplicate” mode – you will see the same contents on both monitors.
• “extend” mode – your monitors display different contents, and you can drag
your contents between the first and second monitor.
• Ensure the display device setting is correct and monitor cables are connected
well.
• For device setting, it could be different because of different operating systems
and S/W version.
• You can search from “Google” as reference setting.
• If the problem still exist, please contact Acrosser FAE or authorized sales
channels.