Acrosser AIV-HM76V1FL - Manual (Page 64)

AIV-HM76V1FL Series User Manual
64 Acrosser Technology Co., Ltd.
6. FAQ
Q 1. Why the Linux operating system can not re-install by the same storage
device?
• Make sure to clean up the original data on the storage device before installation.
• It is recommended to format the storage device before installation.
Q 2. Why the monitor display abnormally on screen during Linux
installation?
• Change another monitor and try to install again.
• Install the OS in "
basic graphics mode".
Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window
under Basic Graphics Mode?
• Make sure the Vender and Project of monitor detected correctly on the Display
configuration.
• Contact your monitor vender to get the driver for Linux.
• Adjust the settings in XORG.CONF:
• Determine the interval between the two frequencies (Max. and Min.) for both
horizontal scanning and vertical scanning your monitor supported.
For example:
HorizSync: 30.0 ~ 80
VertRefresh: 50 ~ 75
• Add the frequencies in XORG.CONF for that "vesa" device and monitor.
• Reboot system.
Q 4. Does my system support Windows 8?
• The system is designed and verified with Windows 7, Fedora 17 and Ubuntu
12.10. Acrosser did not verify this system with Windows 8. Please contact
Acrosser local sales representative or authorized channels to help you confirm
whether a new Windows 8 driver is provided.
Q 5. Why do we get error message when we execute utility program?
• Make sure all the drivers have been installed correctly.
• If the problem still exist, please contact Acrosser FAE or authorized sales
channels.
Q 6. No display when power on?
• Make sure all cables are connected correctly and the power has been turned on:
• Restore CMOS default setting via CMOS headers, then reboot the system.
• If the problem still exist, please keep the necessary components (e.g. CPU,
memory, keyboard and HDD) for testing: