Components assembly, 2.5” sata ssd installation – Acrosser AIV-HM76V1FL User Manual

Page 17

Text mode
Original mode

AIV-HM76V1FL Series User Manual

www.acrosser.com

2. Components Assembly

2.1. 2.5” SATA SSD Installation

Step 1: Loosen the two disk-tray screws by fingers.
Step 2: Pull out the disk-tray and install your 2.5” SATA disk.
Step 3: Fasten the disk with 4 screws provided in the package.
Step 4: Firmly push the disk-tray back into the disk compartment. The disk is now

connected with the system.

Step 5: Push in the disk-tray and fasten the two disk-tray screws by your screw

driver or fingers.

Step 6: Complete.