Dynex DX-32L150A11 - Manual (Page 24)

Setting parental controls
21
DX-32L/37L/40L/46L
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu
opens.
5 Press or to highlight System Lock, then press or to
select On (to enable the blocking scheme you set up and to set
up the blocking scheme (otherwise the rating setting cannot be
accessed) or Off (to disable the blocking scheme you set up).
6 Press EXIT to close the menu.
Setting or changing the password
To set the parental password:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press . The Setup menu
opens.
3 Press ENTER. The Enter Password screen opens.
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu
opens.
5 Press or to highlight Change Password, then press
ENTER. The password entry screen opens.
6 Press the number buttons to input old password, then input a
new password. On the next line, enter the new password again
to confirm it. The Parental Controls sub-menu reopens.
Note: If you forget your password, enter 9999.
7 Press EXIT to close the menu.
Turning the button lock on or off
To turn the parental controls button lock on or off:
1 Press MENU. The on-screen menu opens.
Picture
Select Move MENU Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness 50
Backlight 30
MENU Exit
Time
Closed Caption
Menu Settings
Input Label
Restore Default
Audio Only
Audio Channel
Off
Setup Picture
Select Move
VGA Settings
Parental Controls
Audio Channel
Enter Password _ _ _ _
Setup Picture
Select Move MENU Exit
Audio Channel
Enter Old Password _ _ _ _
Setup Picture
Enter New Password
Confirm Password
_ _ _ _
_ _ _ _
Picture
Select Move MENU Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness 50
Backlight 30
DX-32L-37L-46L150A11_10-0012.book Page 21 Thursday, January 14, 2010 8:30 AM