Dynex DX-32L150A11 - Manual (Page 14)

Making connections
11
DX-32L/37L/40L/46L
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the camcorder or
game console, then connect them to the AV2 IN AUDIO-L and
AUDIO-R jacks on the side of your TV.
To playback the camcorder or play the game console:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV2, then press ENTER.
Note: You can also press VIDEO twice to select AV2.
3 Turn on the camcorder or game console, then follow the
instructions that came with the device to play from the
camcorder or game console.
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect one end of a VGA cable (not included) to the PC IN VGA
jack on the back of the TV, then connect the other end of the
cable to the VGA jack on the computer.
3 Connect one end of an audio cable (not included) to the
PC IN AUDIO jack on the back of the TV, then connect the other
end of the cable to the AUDIO OUT jack on the computer.
Note: The audio cable should have a stereo mini-plug.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
Tip: You can also press the VGA button on the remote for VGA.
3 Turn on the computer, then adjust the computer display
properties as needed.
Connecting a home theater system
Connecting using an analog audio cable
To connect using an analog audio cable:
1 Make sure that your TV’s power cord is unplugged and the audio
amplifier is turned off.
2 Connect one end of a audio cable (not included) to the AUDIO
OUT jacks (L&R) on the back of the TV.
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
3 Connect the other end of the audio cable to the AUDIO IN jacks
on the home theater system.
Connecting using a digital audio cable
To connect using a digital optical cable:
1 Make sure that your TV’s power cord is unplugged and the digital
audio system is turned off.
2 Connect one end of a digital optical audio cable (not included) to
the DIGITAL OUTPUT jack on the back of the TV.
3 Connect the other end of the audio cable to the digital optical
input jack on the digital audio system.
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
To play TV sound through a home theater system:
1 Turn on the TV and select a program to watch.
2 Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
Back of TV
Computer
VGA cable
Audio cable
AUDIO IN
Back of TV
Audio amplifier Audio cable
Back of TV
Digital sound system
Digital optical cable
DX-32L-37L-46L150A11_10-0012.book Page 11 Thursday, January 14, 2010 8:30 AM