Adjusting the picture, Adjusting the tv picture, Adjusting the computer image – Dynex DX-32L150A11 User Manual

Page 18: See “adjusting the tv picture” on, E 15, Ge 15

Adjusting the picture

DX-32L/37L/40L/46L

3 Press

highlight an option, then press ENTER to enter

the sub-menu. You can select:

• Parental Controls—Control which programs/movies your

children can watch, based on industry ratings.

• Time—Set the clock and sleep timer.
• Closed Caption—Turn closed captioning on or off. Also

lets you set closed caption options.

• Menu Settings—Set menu language and menu

transparency.

• VGA Settings—Lets you adjust picture settings to optimize

a computer display. (This menu becomes available only
when a computer display is connected to the television.)

• Input Label—Create a unique name for a device

connected to your TV’s input jacks.

• Restore Default—Reset most TV settings for the current

source to factory default values.

• Audio Only—Turn off the TV picture and listen to audio

only.

4 Press MENU to return to the previous menu, or press EXIT to

close the menu.

Adjusting the picture

Adjusting the TV picture

To adjust the picture:

1 Press MENU. The on-screen menu opens with the Picture menu

displayed.

2 Press or to highlight an option, then press or to adjust

the option. You can select:

• Picture Mode—Selects the picture mode. You can select:

• Vivid (a bright and vivid picture)
• Standard (a standard picture)
• Sports (a dynamic picture)
• Theater (a finely detailed picture)
• Energy Saving (the backlight brightness is decreased)
• Custom (customized picture).

Note: You can also press PICTURE on the remote control to
select the picture mode.

• Contrast—Adjusts the contrast.
• Brightness—Adjusts the brightness.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Backlight—Adjusts the screen backlight.

3 Press

highlight

Advanced Video, then press ENTER

to enter the sub-menu.

4 Press or to highlight an option, then press or to adjust

the option. You can select:

• Color Temperature—Selects the color temperature. You

can select Warm (to enhance the reds), Cool (to enhance
the blues), or Normal.

• Zoom Mode— Selects the aspect ratio of the picture. You

can select:

• Auto (selects the correct aspect ratio automatically.

Available only when Auto Zoom is turned ON).

• Normal (selects the correct aspect ratio to match the

source image).

• Wide (shows a full-screen picture).
• Zoom (enlarges the picture but may crop the top and

bottom).

• Cinema (stretches the picture at the edges, but

maintains a good aspect ratio at the center of the
screen).

Note: The above aspect ratios are all available only when Overscan is

turned ON when watching a digital program.

• Noise Reduction—Selects the noise reduction mode to

reduce picture noise (snow). You can select Weak, Middle,
Strong, or Off.

• Overscan—Turn this On to adjust the picture’s

reproduction rate .

• Adaptive Contrast—Turn this On to optimize the picture

display for a more vivid image.

• DCR—Turn this On to activate the Dynamic Backlight

Control function. Depending on the signal, the TV
automatically adjusts the backlight level, which affects the
overall brilliance of the picture.

• Auto Zoom—In TV mode, setting Auto Zoom to On lets you

set the Zoom Mode to Auto.

5 Press MENU to return to the previous menu, or press EXIT to

close the menu.

Adjusting the computer image

To adjust the computer image:

1 Make sure that your TV is in VGA mode. For more information,

see “Selecting the video input source” on page 13.

2 Press MENU. The on-screen menu opens.

Picture

Select

Move

MENU

Exit

Picture Mode

Contrast

Brightness

Color

Tint

Advanced Video

Audio

Setup

Channel

Custom

Sharpness

Backlight