Dynex DX-32L150A11 - Manual (Page 19)

16
Adjusting the sound DX-32L/37L/40L/46L
3 Press or to highlight Setup, then press . The Setup menu
opens.
4 Press or to highlight VGA Settings, then press ENTER. The
VGA settings menu opens.
5 Press or to highlight an option, then press or to adjust
the option. You can adjust:
• H-Position—Moves the image right or left
• V-Position—Moves the image up or down
• Clock—Adjusts the sample frequency
• Phase—Adjusts the focus of stable images
• Auto—Automatically adjusts the image settings such as
position and phase
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Audio, then press . The Audio menu
opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Sound Mode—Selects the sound mode. You can select:
• Standard (for normal programs)
• News (for news programs)
• Music (for musical programs)
• Movie (for movies)
• Custom (for a customized sound mode).
Note: You can also press AUDIO one or more times to select the
sound mode.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Balance—Adjusts the balance between the left and right
audio channels.
• Surround—Turns the surround sound effect on or off.
• AVC—(Auto volume control) Equalizes the overall volume
levels for all channels.
• Digital Output—(digital channels only) Selects the digital
audio output mode. You can select RAW (outputs audio in its
original format) or PCM (outputs the audio in PCM mode, if
available).
• Audio Language—(digital channels only) Selects an
alternate audio language, if available.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
You can select the audio mode for analog channels.
To select the audio mode for analog channels:
• Press MTS/SAP on the remote one or more times. You can select:
• MONO—Select this option if there is noise or static on weak
stereo broadcasts.
• STEREO—Select this option for programs broadcast in
stereo.
• SAP—Select this option to listen to a secondary audio
program, if available.
Note: Mono is automatically selected if the program is broadcast in
mono.
To select an audio track for a digital channel:
• Press MTS/SAP. The audio track plays if one is available.
MENU Exit
Time
Closed Caption
Menu Settings
Input Label
Restore Default
Audio Only
Audio Channel
Parental Controls
Off
Setup Picture
Select Move
VGA Settings
Move MENU Exit
V . Position
Clock
Phase
Audio Channel
H . Position
Setup Picture
Auto
70
40
60
50
Select
Picture
Select Move MENU Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness 50
Backlight 30
Picture
MENU Exit
Sound Mode
Bass
Treble
Balance
Surround
Digital Output
Audio Language
Setup Channel
Custom
57
50
0
AVC
Audio
Off
English
RA W
Off
Select Move
DX-32L-37L-46L150A11_10-0012.book Page 16 Thursday, January 14, 2010 8:30 AM