Datacom Systems VS-1200 - Manual (Page 8)

VS-1200 Data Acccess Switch 8
© 2009 Datacom Systems Inc
The CE logo indicates that this equipment has been tested and found to meet radiated
and conducted emission to the European Community EMC Directive 89/336/EEC
requirements as per EN 61000-6-3:2001, the generic emissions standard for
residential, commercial and light industrial devices, the limits are those for an EN 55022 Class A
product.
This equipment also has been tested and found to meet the immunity levels for residential,
commercial and light industrial devices according to EN 61000-6-1:2001, the interference severity
levels to the standards and requirements of EN 61000-3-2 Harmonic Current, EN 61000-3-3
Voltage Fluctuations and Flicker, EN 61000-4-2 Electrostatic Discharge, EN 610004-3 Radiated
Susceptibility, EN 61000-4-4 Electrical Fast Transient/Burst, EN 61000-4-5 Surge and EN
61000-4-6 Conducted Susceptibility.
This equipment has completed the Product Safety Review and found to meet the Low Voltage
Directive 98/68/EEC requirements to the standards of EN 60950 Safety of Information Technology
Equipment.
The RoHS compliant logo indicates that this electronic product does not exceed the limit
requirements of toxic, hazardous substances or elements as set forth in Directive
2002/95/EC of the European Parliament and of the Council of 27 January 2003 on
the restriction of the use of certain hazardous substances in electrical and electronic equipment.
The crossed out wheelie bin logo signifies that the product can be recycled after being
discarded, and should not be casually discarded as set forth in Directive 2002/96/EC of
the European Parliament and of the Council of 27 January 2003 on waste electrical and
electronic equipment (WEEE).
1.6 Safety Notices and Warnings
These explanatory labels are included in this information for the user in
accordance with the requirements of IEC 60825.1.
WARNING: Class 1 laser and LED product. A class 1 laser is safe under
all conditions of normal use. Invisible laser radiation may be emitted
from optical port openings when no fiber cable is connected, avoid
exposure to laser radiation and do not stare into open optical ports.