Show time (sh ti), Show management (sh ma), Show groups (sh gr) – Datacom Systems VS-1200 User Manual
Page 20
VS-1200 Data Acccess Switch
20
© 2009 Datacom Systems Inc
4.1.3.4
SHOW TIME (SH TI)
This command displays the set date and time for the product, it is entered as shown:
> SHOW TIME (SH TI)
DATE and TIME
Example: > SH TI
Date/Time
10-09-2007 12:40:25
4.1.3.5
SHOW MANAGEMENT (SH MA)
This command displays Management RJ45 port information as shown:
> SHOW MANAGEMENT (SH MA)
MAC Address
IP Address
IP Subnet
IP Default Gateway
IP Port
Example: > SH MA
MAC Address:
00-14-E2-00-23-9F
IP Address:
192.168.1.50
IP Subnet:
255.255.255.0
IP Default Gateway:
192.168.1.2
IP Port:
2370
4.1.3.6
SHOW GROUPS (SH GR)
This command displays all ports as designated by the administrator (Superuser) as belonging to the
same logical group. Specifically, groups can be configured as if they were a single logical port,
enabling a high degree of control during both the initial setup and all subsequent moves or changes.
The GROUP NAME followed by the ports included in the group are displayed. It is entered and
displays data as shown:
> SHOW GROUPS (SH GR)
GROUP NAME
Port in group (Port number: Port name)
Port in group (Port number: Port name)
Example: > SH GR
TAP:
9: Port 9
10: Port 10