Specifications, English – Denon DN-X1100 User Manual
Page 13
Getting Started
Connections
Fader Start
ENGLISH
n
General
Maximum external dimensions:
320 (W) x 357 (D) x 91 (H) mm
Installation:
Table-Top
Weight:
6.2 kg
Power supply:
AC 120 V, 60 Hz
(U.S.A. and Canada models)
AC 230 V, 50 Hz
(European models)
Power consumption:
17 W
Environmental conditions:
Operational temperature:
5 to 35 °C
(41 to 95 °F)
Operational humidity:
25 to 85 %
(no condensation)
Storage temperature:
–20 to 60 °C (4 to 140 °F)
n
Audio section
• Input Sensitivity & Impedance:
Main Mic:
–54 dBV (2.0 mV)
10 kΩ/kohms
Aux Mic:
–60 dBV (1.0 mV)
10 kΩ/kohms
Effect (Return):
–14 dBV (200 mV)
50 kΩ/kohms
3-Phono:
–50 dBV (3.0 mV)
50 kΩ/kohms
8-Line:
–14 dBV (200 mV)
50 kΩ/kohms
• Output level & Impedance:
Main (Balanced):
4 dBm
(1.23 V)
600 Ω/ohms load
Main (Unbalanced):
0 dBV
(1.0 V)
1 kΩ/ohms
Booth (Balanced):
4 dBm
(1.23 V)
600 Ω/ohms
Rec (RCA):
–10 dBV (316 mV)
1 kΩ/kohms
Effect (Send):
–14 dBV (200 mV)
1 kΩ/kohms
Headphone:
0 dBV
(1.0 V)
32 Ω /ohms (33 Ω/ohms load)
Frequency Response:
Line:
20 to 20 kHz ±2 dB
Phono:
20 to 20 kHz RIAA ±2 dB
Mic:
20 to 20 kHz ±2 dB
• Signal to Noise ratio:
Line:
82 dB
0 dBV, 1 kHz, EQ flat
Phono:
75 dB
0 dBV, 1 kHz, EQ flat
Main Mic:
65 dB
0 dBV, 1 kHz, EQ flat
• Total harmonic distortion rate:
Line:
Below 0.05 %
Phono:
Below 0.05 %
• Cross talk:
Over 70 dB
• Channel equalizer:
Hi:
+10 dB, –33 dB (16 kHz)
Mid:
+10 dB, –35 dB (1 kHz)
Low:
+6 dB, –35 dB (60 Hz)
• Microphone equalizer:
Hi:
+12 dB, –12 dB (10 kHz)
Mid:
+12 dB, –12 dB (1 kHz)
Low:
+12 dB, –12 dB (100 Hz)
z
Specifications and design are subject to change without notice for purpose of improvement.
Specifications
Unit: mm
Specifications
320 mm
37
4 mm
357 mm
11
4 mm
92.5 mm