Datamax Allegro 2 - Manual (Page 105)

Specifications
Allegro2 F-3
Media
Width: 0.75" (19mm) to 4.65" (118mm); 4.25"
(108mm) maximum recommended
Length: 0.50" (13mm) to 99.99" (2539mm)
Thickness: 0.0025" (0.0635mm) to 0.0100" (0.254mm)
Type: Roll-fed, die-cut continuous or fan-fold labels,
tags or tickets; most direct thermal or thermal
transfer materials
Supply Roll: 8" (203mm) maximum diameter on 1.5" (38mm)
to 3" (76mm) cores
Optional Front Rewind: 8" (152mm) maximum O.D. capacity (full supply
roll)
Label Material: Thermal transfer plain-coated papers, vinyl,
Mylar, metalized paper, nonwoven fabric, fine
woven fabric, thermal-visible light scannable
paper, infrared scannable paper, thermal ticket/tag
stock, thermally sensitive plastic stock.
Thermal -Transfer Ribbons: Standard widths are 25mm, 38mm, 51mm, 64mm,
76mm, 89mm, 110mm; 1182' (360m) length
Media Sensing: Moveable “see-through” for die-cut labels and
reflective for tags with black striping
Note: The reflective sensor mark must be carbon based. The sensor
is infrared and will reflect off of a plain black mark.