Daewoo DRV-6815 - Manual (Page 50)

RECORDING
49
Thanks to this programming system, you no longer
need to tediously enter the date, programme number,
start and end time. All the information needed by the
DVD Recorder + VCR for programming is contained in
the ShowView programming number. This ShowView
number is found in most TV listings.
1 Insert recordable media such as DVD±R,
DVD±RW, recordable VHS tape.
2 Press [TIMER].
The ‘Timer Recording’ menu appears.
3 Select ‘ShowVIew’ with [ …/†] and confirm
with [ENTER].
The ‘ShowVIew’ menu appears.
Enter the entire ‘ShowView’ number. This number
is up to 9 digits long and can be found next to the
start time of the TV programme in your TV listings
magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the ‘ShowView’ number.
If you make a mistake, you can clear it with [œ].
You can also select Target, Quality and Repeat
by using [œ √]. To change status of each item,
use […†].
4 Press [ENTER] to confirm.
5 The decoded information appears after
confirmation. You can go back at any time to
change the information by pressing [ENTER] and
select ‘Edit’ on the menu as explained above.
Select the appropriate input field using […†]. If
required, change the information using […†].
If all the information is correct, press the [ENTER]
button. The programming information is stored in
a TIMER block.
Timer Recording using ShowView system
Timer Recording
Timer Recording
†
†
Target Quality Repeat
DVD SP Once
ShowView No. 523_ _ _ _ _ _
Timer Recording List 1/1 28/11/2010 13:09:33
Confirm Back Exit ENTER MENU TIMER
Target Date Start Stop PR No. Quality Repeat
DVD 28/11 Tue 13:20 14:13 PR2 SP Once
Timer Recording List 1/1 28/11/2010 13:09:33
Confirm Back Exit ENTER MENU TIMER
Target Date Start Stop PR No. Quality Repeat
DVD 28/11 Tue 13:20 14:13 PR2 SP Once
DVD 28/11 Tue 14:20 18:05 PR3 HQ Once
- - - - -/- - --- - -:- - - -:- - - - - - - - - - -
Edit
Delete
Disable
Cancel
6 Press [TIMER] to exit the Timer Record List.
7 Timer indicator will light or start blinking. You
must power off the DVD Recorder + VCR to
start the Timer Recording.
ShowView is not available for some countries.
Timer Recording
Move
Confirm
Exit
…
†
ENTER TIMER
Move
Confirm
Exit
…
†
ENTER TIMER
†
†
Timer Recording
Showview
Move …
†
Move …
†
DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM ˘ ` 49 mac001 1200DPI 100LPI