Daewoo DRV-6815 - Manual (Page 48)

RECORDING
47
During one touch copy you can search and resume
copy.
1 Press [PLAY/PAUSE] to enter COPY EDIT mode.
2 Press [PLAY/PAUSE] again to playback.
3 Search with [FF/REW] button.
4 Press [VCR √√ DVD] to resume copy.
Copy Edit (VCR ➝DVD)
Basic Recording
You can copy the contents of a VHS tape to a DVD±R
or DVD±RW. This allows you to archive your old VHS
tapes to DVD.
1 Insert a VHS Tape.
Insert the VHS videotape you wish to copy into
the VCR deck.
2 Insert a DVD±R or DVD±RW disc.
Insert a blank DVD±R or DVD±RW disc in the
DVD deck and close the disc tray.
3 Find the place on the VHS tape from which
you want to start recording using the
[PLAY/PAUSE], [FF] and [REW] functions.
And press [STOP].
4 Press [VCR √√ DVD] on the front panel.
5 Press [ENTER] to select the desired Record
Mode in ‘Copy to Disc’ menu:
• HQ (High Quality - 1 hr/disc)
• SP (Standard Play - 2 hrs/disc)
• EP (Extended Play - 4 hrs/disc)
• SEP (Very Low Quality - 8 hrs/disc)
6 Press [VCR √√ DVD] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS
tape ends.
If the VHS videotape you are attempting to copy is
copy-protected, you will not be able to copy the
tape. It is not permitted to copy Macrovision
encoded tapes.
When using a DVD+RW disc, you must initialize
before copying; see page 30.
One Touch Copy - VHS to DVD
Copy to Disc
Choose quality and press COPY key
HQ
SP
EP
SEP
■ Exit
2 Search with [FF/REW] or [NEXT/PREV] button.
3 Press [VCR œœ DVD] and you can change REC
SPEED.
4 Press [VCR œœ DVD] again to resume copy.
DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM ˘ ` 47 mac001 1200DPI 100LPI