Directed Electronics 335912 359D User Manual

Page 22

step 5

Parking light flash

There are several different types of parking light circuits. The

following description is for a standard negative-triggered parking

light circuit, usually located at the light switch. If the web vehicle

information suggests a different type of parking light circuit,

please contact Rattler Technical Support.

Using the web information on the vehicle, locate the suspected

wire and place the red lead of the meter to a constant (+)12 volt

source and secure it. Place the multi-meter in the DC position.

Using the black lead of the meter, probe the wire. With the

switch in the off position the meter will read 0.00 volts. While

watching the meter, turn the switch to the parking light posi-

tion. The meter will read between 10.00 volts and 13.00 volts.

Once you have identified the correct wire, solder the WHITE

wire on the main connector to it and cover the connection with

electrical tape.

➜