Directed Electronics 335912 359D - Manual (Page 12)

9 © 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
iin nsstta alllla attiio on n
Be sure to read this section thoroughly and view the Rattler Do-
It-Yourself Installation Video in its entirety before starting the
installation. Pay special attention to all warnings to prevent
personal injury or damage to your vehicle.
Visit our 24-hour technical Web site (w ww ww w..d diiyyrraattttlleerr..ccoom m) to get
a vehicle-specific wiring guide prior to starting this installation.
If at any time during the installation you are unable to answer
your questions on the Web site, call 1 1--8 80 00 0--8 87 73 3--1 13 31 14 4 for live
technical assistance.
warning! DO NOT use any testing tool
other than a digital multi-meter to prevent
costly damages to your vehicle. Use of a test
light may cause grounding of sensitive elec-
trical components that can damage the on-
board vehicle computer and processors
resulting in substantial cost for replacement.
warning! On vehicles with air bags or sup-
plemental restraint systems (SRS) you may
notice a bright yellow tube with small wires
in it marked SRS underneath the steering
column near the key cylinder. DO NOT
tamper or unplug these for any reason to
prevent costly damages to your vehicle or
personal injury. Tampering may cause
unintended deployment of airbags.
warning! This system is intended for auto-
matic, fuel-injected vehicles only. Installation
in any other vehicle is contrary to its intend-
ed use.