Audiovox TRAN-410A - Manual (Page 8)

jENDl to terminate a call.
To Receive Calls
1. When the telephone rings, lift the handset out of
the cradle or press
|SND
to answer the call. The
I
IN
USE I indicator will light.
2. If the handset is out of the cradle when ringing
starts, press [SND| to answer a call.
To Place a Call with a Number in the
Memory
To Mute a Phone Conversation
1. Press jRCLl , then enter the memory address ( 01
through 50). The last 10 digits of the number will
appear on the readout. If the number is longer
than 10 digits, hold down the second digit of the
memory address (after pressing
|RCL|
)to see the
prefix.
Note: See “To Recall a Number from Memory” and
“To Review the Prefix” for more details.
2. Press
|SND|
. The j
IN USE
| indicator will light as
the call is placed.
911 Emergency Call (NAM Option)
This feature permits you to place an emergency call
(911) even if your telephone unit has been set to the
Lock Mode or Call Restricted Mode.
Operation in Lock Mode
1. Enter the emergency call number (911); [9irnpt|
(“911” is not indicated, but the |
LOCK
indicator
will light.)
2. Press
|SND|
,the |
IN USE]
indicator will light.
3. To terminate the call, press
|END|
. (The |
IN USE |
indicator will go out.)
Operation in Call Restriction Mode
The operation and display are the same as in the
normal mode.
Automatic Answering(NAM Option)
If this feature is selected, the call will be automati­
cally connected for operation after two alert tones,
and the
[¡N USE 1
indicator will light on the readout.
Then the unit will be ready for Hands-free operation.
Note: This feature will not be functioned if the unit
is in the followdng mode, or the handset is
out of the cradle. Lock Mode, Horn Alert
Mode, Calls Absence Indicator Mode.
1. Press
IFUNC
, then key [§ . |
Mute \
will appear
on the readout. Then the transmit audio will be
muted and the receive audio will be heard from
the loudspeaker. You may converse privately
w'ith a passenger during a call with the handset
either “on-hook” or “off-hook”.
T 0
return to normal conversation, press
|FUNC|,
then key [§ again or lift the handset out of the
cradle.
Mute is reset when call is terminated.
CALL RESTRICTIONS
(NAM OPTION)
This feature permits you to impose various kinds of
restrictions on Outgoing Calls.
To Set Call Restricted Mode
Enter the three-digit security code, then press
iFUNCj
, key [#] then .
The following key operation is needed to activate
one of the restricted modes:
rn: Only phone numbers having 11 digits or less are
accepted. Operator assisted dialing is prohibited.
: Only phone numbers having 7 digits or less are
accepted. Operator assisted dialing is prohibited.
: Operator assisted dialing (0 Origination) is pro­
hibited.
No phone calls can be placed except for re­
pertory dialing from memory address 01 to 09.
However, emergency call with “911” are avail­
able.
[§: No restriction.
To Exit Call Restriction
Programming Mode
Press
FUNCI
, then
[CLR| .
Noted): When in restricted mode 4, number storage
into the memory will not be permitted.
Note(2): In the restricted mode, a short beep tone
will be heard to inform you of the improper
operation, and the word iRestrict^ w'ill be
showm on the readout.
15
14