Audiovox TRAN-410A - Manual (Page 4)

The following pages, which describe the unit’s func­
tions and many of its components, will help you to
make the easiest and most efficient use of the
Audiovox TRAN - 410A cellular telephone.
FEATURES AND OPTIONS
• Push Button Dialing
• Backlit Keypad and Display with ON/OFF Control
• Large Size Dot-matrix LCD Display
Status/Function Indicator
15-Digit Dial Number
Receiving Signal Strength Indicator
• Pre-set Dialing up to 16 Digits (32 Digits : NAM
Option)
• Extended Readability
• Last Digit Clear
• Digit Display Clear
• On-Hook Dialing
• 911 Emergency Call in all modes
• Repertory Dialing : 16 Digits 50 Memories
• Repertory Memory Scroll
• Automatic Storing into a Vacant Memory Address
• Link Pre-set Dialing from Memory
• Last Number Redial
• Automatic Redial (NAM Option)
• Last Number Review
• Mute or Hold
• Call Restrictions (NAM Option)
• Scratch Pad Dialing (with/without keying Tones)
• End-to-End Signaling
• Touch Tone™ from Memory
• Continuous DTMF from Keypad
• Automatic Answering (NAM Option)
• Call Time Display (Five Functions)
• Calls in Absence Indicator
• Display Own Telephone Number
• Multiple A/B System Selection
• System Inhibit (NAM Option)
• Multiple City Registration
• RF Channel Indicator
• Electronic Lock
• Automatic Lock (NAM Option)
• Function Review
• Optional Hands-free Operation
• Optional Battery Pack
• Optional AC Charger
GENERAL SPECIFICATIONS
(subject to change without notice)
824 to 849 MHz Transmit
869 to 894 MHz Receive
832 Full Duplex
30 kHz
45 MHz
+ 2.5 PPM
-30°C to + 60“C
Frequency Range:
Number of RF Channels:
Channel Spacing:
Duplex Spacing:
Frequency Stability:
Operating Temperature:
Supply Voltage: 13.7 V DC+20%, Negative Ground
Current Drain: approx. 1.5 A in use, 0.2A standby
Size:
Transceiver: 26H
x
210W
X
150D(mm)
1.02H
X
8.27W
X
5.90D(inches)
Telephone Unit: 61H
X
60W
x
200D(mm)
2.40H
X
2.36W
X
7.87D(inches)
Weight:
T ransceiver:
Telephone unit:
RF Power Output:
approx. 1.0kg (2.211bs)
approx. 0.4kg (0.881bs)
3 watts (50 ohms)