Remove oven accessories, Cleaning and maintenance – AEG B 60 D User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cleaning and maintenance

Removing the shelf supports

Remove oven accessories

1 Loosen both nuts at the rear on the left and

right of the oven.

2 Unscrew both nuts at the front on the left

and right of the oven.

3 Remove the shelf supports.
Re-assemble in reverse order.

To remove the rear panel

The rear panel

(fig. 10)

of the oven can be

removed for cleaning. Proceed as follows:

1. Unscrew the four nuts.

2. Clean the panel as in the case of all

enamelled surfaces.

3. Re-assemble in reverse order.
When replacing the rear panel, make sure that

it is correctly placed.

To remove the fan

Having removed the rear panel you will gain
access to the fan

(fig. 11)

which Is held on the

motor shaft by a nut (left-hand thread). Loosen

this nut by turning it clockwise and remove the

fan. Clean the fan with hot soapy water.

Replace the fan and remember to fasten the
nut by turning it anti-clockwise.