Installation, Before installation – Beko HII 64400 AT User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Installation
Refer to the nearest Authorised
Service Agent for installation of the
product. Make sure that the electric
and gas Installations are in place
before calling the Authorised Service
Agent to have the product ready for
operation. If not, call a qualified
electrician and fitter to have the
required arrangements made.
[f] Preparation of location and
electrical and gas installation for
the product is under customer’s
responsibility.
A The product must be installed in
accordance with all local gas
and/or electrical regulations.
A Prior to installation, visually
check if the product has any
defects on it. If so, do not have it
installed.
Damaged products cause risks
for your safety.
Before installation
The hob is designed for installation in a
commercial worktop. A safety distance
must be left between the appliance
and the kitchen walls and furniture.
See figure (values in mm).
•
It can also be used in a free
standing position. Allow a
minimum distance of 750 mm
above the hob surface.
•
(*) If a cooker hood is to be
installed above the cooker, refer to
cooker hood manufacturer'
instructions regarding installation
height (min 650 mm)
•
Remove packaging materials and
transport locks.
•
Surfaces, synthetic laminates and
adhesives used must be heat
resistant (100 °C minimum).
•
The worktop must be aligned and
fixed horizontally.
•
Cut aperture for the hob in
worktop as per installation
dimensions.
8 I EN