Specifications, Residuai heat indicator, Control panel – Beko HII 64400 AT User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Control panel
Specifications
0
On / Off key
0
Temperature
setting/lncreasing timer
0
Temperature
setting/Decreasing timer
Keylock
Enable/disable timer
Front Left Cooking Zone
Selection key
Rear Left Cooking Zone
Selection key
Rear Right Cooking Zone
Selection key
Front Right Cooking Zone
Selection key
Graphics and figures are for
informational purposes only.
Actual displays and functions
may vary according to the model
of your hob.
m This product is controlled with a
touch control panel. Each
operation you make on your
touch control panel will be
confirmed by an audible signal.
m Always keep the control panel
clean and dry. Having damp and
soiled surface may cause
problems in the functions.
©
H
H
Q
Q
m
1. Touch the "©" button on the
control panel.
"0" icon appears on all cooking zone
displays.
Turning on the hob
[f] If no operation is performed
within 10 seconds, the hob
will automatically return to
Standby mode.
Turning off the hob
1. Touch the "©" button on the
control panel.
The hob will turn off and return to
Standby mode.
[|] "H" or "h" symbol that
appears on the cooking zone
display indicates that the
cooking zone is still hot. Do
not touch cooking zones.
Residuai heat indicator
"H" symbol that appears on the
cooking zone display indicates that the
hob is still hot and may be used to
keep a small amount of food warm.
This symbol will soon turn to "h"
symbol meaning less hot.
m When power is cut off, residual
heat indicator will not light up
and does not warn the user
against hot cooking zones.
17 I EN