Basic recording, Recording to dvd, One touch record (otr) – Daewoo DRT-10 User Manual
Page 43
42
Recording to DVD
If you press [TV/DVD], you will be in DVD mode.
You can start recording to DVD pressing the [REC]
button. (The unit must have a recordable media in
the tray.)
1
Turn on the DVB-T DVD Recorder and load a
recordable disc .
Make sure your TV input is set to view the
DVB-T DVD Recorder.
Select the media to record by pressing
[TV/DVD] on the remote control.
2
Set the desired Recording mode by pressing [REC
MODE] repeatedly.
Available disc space will be
displayed by selecting
recording mode.
3
Set the desired Recording
source by pressing [INPUT] or
[TV/DVD].
You can select which video input you want to
record from the following options are available.
- TV, AV1, AV2, AVF, S-VIDEO Input or DV Input.
4
Press [REC (
●
)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc is full.
To record for a fixed length of time, see One
Touch Record.
5
Press [STOP (
■
)] to stop recording.
• The maximum number of DVD titles per disc is
49. If the DVB-T DVD Recorder is powered off
during DVD recording, the recording will not be
saved.
• If a DVD+RW or unfinalised DVD±R, DVD-RW
disc is inserted in the tray, no title is played
automatically after loading is finished.
• If you are recording to a blank DVD±R (±RW)
disc, it may take up to 7 minutes (it depends on
the disc) for post processing after recording.
Record Quality
DVD record quality HQ
-RW
Free: 0hr., 54mins.
One Touch Recording allows you to add recording
time in fixed increments at the touch of a button.
1
Follow steps 1-3 under Recording to DVD.
2
Press [REC (
●
)] repeatedly to set the length of the
recording.
Recording starts after the first press. Each
subsequent press increases the recording time
by 15 minutes within the available space
(DVD). The recording time is displayed on the
front display panel.
One Touch Record (OTR)
Basic Recording
Basic Recording
1
Press [PLAY/PAUSE] to pause the disc during
recording.
2
To continue recording, press [PLAY/PAUSE] or
[REC (●)].
To Pause the Recording
• To quit One Touch Recording, press and hold
[STOP] for 5 seconds.
• The DVB-T DVD Recorder will automatically
power off when One Touch Recording ends.
0817DTBD-LN11PA-AGN(GB)
2006.8.17
4:8
AM
˘
`
42