Daewoo DRT-10 - Manual (Page 39)

38
Still Picture and Frame-by-Frame Playback
1
Press [PLAY/PAUSE] during playback. The DVB-
T DVD Recorder will go into Still mode.
2
You can advance the picture frame-by-frame by
pressing [FF (√√)] repeatedly during Still mode.
Fast Forward/Backward
1
Press [REW (œœ)] or [FF (√√)] during playback.
The DVB-T DVD Recorder will go into Search
mode.
2
Press [REW] or [FF] to select the desired speed:
√√ X2, √√ X4, √√ X8, √√ X16, √√ X32
(forward) or œœ X2, œœ X4, œœ X8, œœ X16,
œœ X32 (backward).
Slow Motion
Press [SLOW+] during playback to select the desired
speed: 1/2, 1/4, 1/8, 1/2, ...(forward). Press [SLOW-]
to go back to normal speed: 1/8 ➝ 1/4 ➝ 1/2 ➝
PLAY.
Changing the Audio Language
Press [AUDIO] and then press [AUDIO] repeatedly
during playback to hear a different audio language
or audio track.
Subtitles
Press [SUBTITLE] and then press [SUBTITLE]
repeatedly during playback to select among all
available subtitle languages.
Zoom
The Zoom function allows you to magnify the video
image and scroll around the enlarged image.
1
Press [ZOOM] during Play mode to activate the
Zoom function.
Each press of the [ZOOM] button changes the
Zoom level as follows: X1 (normal size) ➝ X2
➝ X4 ➝ X1 (normal size)
2
Use the [œ √…†] buttons to scroll around the
zoomed picture.
3
To resume normal playback, press [ZOOM]
repeatedly until the X1 (normal picture)
appears.
1
Press [TV/DVD] to set the remote control to
operate the DVD.
Turn the TV on and select the video input
source connected to the DVB-T DVD Recorder.
Audio system: Turn the audio system on and
select the input source connected to the DVB-T
DVD Recorder.
2 Press [OPEN/CLOSE] to open the disc tray.
3 Load your disc in the tray with the playback side
down (label side up).
4 Press [OPEN/CLOSE] to close the tray.
5
'LOAD' appears on the front panel display, and
playback starts automatically. If playback does
not start, press [PLAY (√)]. In some cases, the
Disc menu may appear instead.
Playing a DVD
When a DVD+RW or unfinalised DVD+R/-R/-RW is
inserted, no title is played automatically but the
current TV channel displays on the screen.
If you want to play a title on the DVD+R (+RW), you
must press [MENU] or [PLAY] to display the disc
menu. Select a title to play then press [OK].
Playing a DVD
DVD Playback DVD Playback
If a Disc menu is displayed
• A Disc menu may be displayed when you load
a DVD. Use the [œ √…†] buttons to select
the title/chapter you want to view, then press
[OK] to start playback. Press [TITLE/PBC] or
[MENU] to return to the Disc menu.
• The DVB-T DVD Recorder will not play discs
with Region codes different from the DVB-T
DVD Recorder. The Region code for this DVB-T
DVD Recorder is 2 (two).
• Unless stated otherwise, all operations
described below use the remote control. Some
features may also be available in the Setup
menu.
• A disc which is recorded by computer at high
speeds (greater than or equal to 2x) may not be
recognized.
• A disc which is recorded with unauthorized
movie material may not be played.
• A disc which is recorded by another recorder or
not recorded correctly may not be recognized
or played.
0817DTBD-LN11PA-AGN(GB) 2006.8.17 4:8 AM ˘ ` 38