Daewoo DRT-10 User Manual

Page 16

INTRODUCTION

Identification of Controls

Displays a screen in multi angles (only in multi-angle supported DVD)

Switches between TV and Radio mode.

Displays a disc’s Title menu, if available.

Selects Recording mode. (Approx.)
HQ (1hr), SP (2hrs), EP (4hrs), SLP (6hrs)

Displays the Timer Recording menu.

Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 42.

Repeats the current chapter, track, title or the entire disc.

Repeats playback between two points (A and B).

Progressive Scan Mode

• If your TV supports Progressive Scan, you can view high quality video by setting the

DVB-T DVD Recorder to Progressive Scan mode. If your TV does not support
Progressive Scan, do NOT change to Progressive Scan mode.
If you do so accidentally, press [P.SCAN] to restore normal viewing.

• When video output mode is changed from RGB or Interlace to Progressive, Scart

output is not adequate for Component video.

• As component outputs have their own Jacks on the back side, change the TV input

into Component input, after connecting the component cables from the DVB-T DVD
Recorder to the TV.

• Changing from Interlace or RGB to Progressive, should be the opposite of above.

Selects an audio language (DVD), audio channel (CD) or audio type (TV).

Selects a subtitle language, if available.

Enlarges the video image.

Disc Operation options

Searches for a specific title or a chapter.

Switches between Progressive Scan and Interlace Scan mode.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN THE CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY 'WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

0817DTBD-LN11PA-AGN(GB)

2006.8.17

4:8