AEG 312B User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Shelf suppertg
Removing
To clean the sides of fhe oven, the shelf supports (see IHustra- the shelf
tion) can be removed.
supports
Pull the shelf support at the bottom, towards the centre of the
oven and unhook from the top. Replace,in reverse order.
Fold down gritl/top heating element in the main oven.
The Qhll/top, heating element can be folded'down to facilitate
occasional cleaning of the oven roof.
Warningl Befors you proceed ensure that the element Is
cold and all the oven controls are switched off.
Turn the2 holding screws to the centre. The element folds down
giving you access to the oven roof (see illustration}
Warnkigl Do not force the element too far down othenmse
you run the risk that it breaks off.
After cleaning, push the element upward and turn the hooks back
ensuring that the
crossbar of the element
is secured within the
hooks.
the hooks must not be clipped over the element.
s
cc
23