2) cleaning the cabinet and the lens, ᕢ cleaning the cabinet and the lens, Cleaning the cabinet and the lens – Canon LV-X6 User Manual
Page 61: Maintenance
52
6. Maintenance
3. Reinstall the new filter cover.
NOTE: Do not wash the filter with soap and water. Soap and water will damage the filter membrane. Before replacing the filter,
remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement.
NOTE: When you replace the lamp, it is also wise to replace the filter. The filter comes in the same package with your
replacement lamp.
4. Turn on the projector.
5. Reset the Filter counter. See page
P
U
S
H
· Cleaning the Cabinet and the Lens
1. Turn off the projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong
detergents or solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
MENU
BACK
KEY
STO
NE
W
AR
NIN
G
PO
W
ER
AU
TO
PC
INP
UT
LA
MP
-
+
VOL
VOL