Canon LV-X6 - Manual (Page 31)

22
3. Projecting an Image (Basic Operation)
ᕢ Selecting a Source
Selecting the computer or video source
WER
AUTO PC
INPUT
VOL
-
POWER
BACK
INPUT IMAGE
ASPECT
INFO.
MENU
NO SHOW
AUTO PC
NOTE: Turn on the computer or VCR connected to the projector.
Selecting from INPUT List
Press and quickly release the INPUT button on the projector cabinet to
display the Source list. Each time the INPUT button is pressed, the input
source will change as follows: "Computer 1", "Computer 2 (LV-7250 only)",
"Video" (VCR or laser disc player), "S-Video", To display the selected
source, allow 1 second to elapse.
Detecting the Signal Automatically
Press and hold the INPUT button for a minimum of 2 seconds, the pro-
jector will search for the next available input source. Each time you press
and hold the INPUT button for a minimum of 2 seconds, the input source
will change as follows:
LV-7250
Computer1
→ Computer2 → Video → S-Video → Computer1 → ...
LV-X6
Computer
→ Video → S-Video → Computer → ...
TIP: If no input signal is present, the input will be skipped. When the input
source you wish to project is displayed, release the INPUT button.